Version history of the desktop weave-design program https://flaxforge.app/feed.xml 2026-09-24T10:00:00Z Flaxforgeinfo@flaxforge.app tag:flaxforge.app,2026:3.4.2 2026-09-24T10:00:00Z

Colour-and-weave preview now follows the warp palette during a drag; the peg plan writes its trailing blank pick again; two undo-stack crashes after a 2048-pick import are fixed.

tag:flaxforge.app,2026:3.4.0 2026-08-11T10:00:00Z

Independent left and right borders, floating selvedge ends drawn outside the reed plan, and the library grown to 412 structures. Regressed the peg plan trailing pick, fixed in 3.4.2.

tag:flaxforge.app,2026:3.3.1 2026-05-28T10:00:00Z

Solver no longer over-counts shafts when a repeat ends as it began; PBM import reads split-line headers; undo depth restored to 400 steps.

tag:flaxforge.app,2026:3.3.0 2026-04-21T10:00:00Z

Threading solver rewritten around end grouping, so a 24-shaft advancing twill resolves in about 90 ms; sett check names the over-filled dent; library at 394 with honeycomb and waffle done.

tag:flaxforge.app,2026:3.2.2 2026-01-15T10:00:00Z

A3 printing kept the second band out of the margin on long warps; SVG grid lines are drawn in the millimetre weight the dialogue states.

tag:flaxforge.app,2025:3.2.0 2025-11-05T10:00:00Z

Printing rebuilt into numbered 100-end bands, PDF and SVG line weights in millimetres, a ninety-second backup folder keeping ten copies, and the float overlay bound to F8.

tag:flaxforge.app,2025:3.1.1 2025-07-30T10:00:00Z

Serial peg plan output honours the stop-bit setting on every platform; colour run lists beyond 48 entries survive a save.

tag:flaxforge.app,2025:3.1.0 2025-06-17T10:00:00Z

Builds for Linux on aarch64, colour sequences to 64 entries each way, an editable keyboard map, and the library at 356 structures.

tag:flaxforge.app,2025:3.0.2 2025-02-11T10:00:00Z

Border-unit files written by 3.0.0 reopen and are repaired on load; the macOS build drops a folder permission it never used.

tag:flaxforge.app,2024:3.0.0 2024-10-02T10:00:00Z

New documented flxd/3 header, shaft and treadle maximum raised to 40, colour-and-weave preview with run lists, SVG and PDF export, and a 2048 by 2048 repeat limit.

tag:flaxforge.app,2024:2.6.2 2024-07-09T10:00:00Z

Last release of the 2 series; tab-separated import no longer stops at the first empty column.

tag:flaxforge.app,2024:2.6.0 2024-04-15T10:00:00Z

Configurable float warnings boxed in the drawdown, peg plan over a serial line, and the library at 300 structures.

tag:flaxforge.app,2023:2.0.0 2023-05-09T10:00:00Z

Twenty-four shafts, printing worth the name, and the first interchange export.

tag:flaxforge.app,2022:1.0.0 2022-03-14T10:00:00Z

First release: eight shafts, a library of 46 structures, and a file format only we could read.